Cut Throat Shavette Razor Stainless Steel

Close
65171-DefaultImage-1
 
Dovo Solingen

Cut Throat Shavette Razor Stainless Steel

$59.95

Product Code: 65171

made-in-Germany

 

SORRY, THIS PRODUCT IS CURRENTLY SOLD OUT

$10 Delivery Australia wide
Free Shipping over $100

Product Information

  • Dovo Solingen Cut Throat Shavette Razor, made in Germany

  • Stainless Steel Handle, with red and black shavette razor inserts

  • Includes 2 shavette stainless steel blades


PRODUCTION
The basic material preferred for open razors is normal steel with a minimum carbon content of 0.6%, in order to achieve the highest degree of hardness, elasticity and resistance to wear.


The blank consists of a cropped piece between 20-25 mm wide and 5-6 mm thick. the cropped pieces are heated and hot-forged under immense pressure from a drop hammer in the forging dye.


The heat-treatment, the so-called "hardening", is extremely important for the blank. Depending on the quality of the steel, the blank is heated up to 1.300°C and subsequently chilled in a special oil. The temperature limits are often crucial. The subsequent tempering at 200 to 400°C, depending on the type of steel, gives the blade its elasticity and toughness. 

 

CARE OF THE RAZOR
Correct care is essential for the maintenance and long life of this traditional gentlemen's accessory. Each time it is used, the entire razor must be rinsed in clear water and dried thoroughly.


If the razor is not used for a longer period, it is advisable to coat it lightly with oil. Never store the razor in a damp, unventilated place. 

 

RAZOR STROPS AND HONING
While flat razors are sharpened using strops with wooden handles where the razor can be "pushed" along the strop, half or full hollow-ground razors are sharpened using hanging strops, in some cases with a knob made of fine cow-hide or smooth Russian-type leather with which the strop can be hung up.

 

Some of these strops have a hemp tube on the reverse side which serves to position the sharp edge in the direction indicated by the razor. If necessary, the leather side can be coated with a thin layer of fine grinding paste (red paste), and with polishing paste (black paste) for polishing on a separate strop, and subsequently worked in with the palm of the hand.

 

Sharpening is effected at a plane angle with the back of the razor on the razor strop; it should be first be drawn away from the body. When changing direction, the razor should be turned with its back to the strop and then drawn towards the body.

 

If the cutting edge of the razor faces the strop while the razor is being turned, it will become round and lose its cut. In this case, only regrinding by a specialist will help.

 

 

You Recently Viewed

Shaver Shop Shipping Policy

  • Items are delivered with Australian Post and are shipped within 3-5 business days